The 2850 Series, V disc, available for tractors ranging from 181 to 390 LE in nine different versions with working widths between 3.7 and 7.6 meters, allows virtually every farm to select the optimal size heavy-duty disc. FEATURES
- The uniquely designed V-disc is available in five rigid and four folding configurations. This V-disc follows the ground contours well and leaves an excellent surface finish in both plowing and stubble cultivation.
- The main frame structure and axle supports are made of high-strength box sections for maximum power transmission, durability, and a long service life.
- It folds hydraulically into the transport position; the working cylinders mechanically lock the heavy disc in the raised position, preventing it from falling.
- In the transport position, a ground clearance of 25 cm is possible with the standard 71 cm diameter disc.
- The disc angle is adjustable on both the front and rear axles to 18°, 20°, and 22°.
- A working depth of up to 23 cm is achievable with the 71-cm disc bases.
- Each disc is equipped with a reliable, heavy-duty, 11-inch double-tapered shaft bearing that runs in oil within a cast-iron housing.
- The protective wear plates on the bearing housings, included as standard equipment, reduce damage caused by wear and extend service intervals, thereby lowering maintenance costs.
- 11” (279 mm) disc spacing, 1-5/8” (41.3 mm) axle diameter.
|
Model |
Working width (m) |
Number of discs (pcs) |
Transport width (m) |
*Recommended |
Weight per disc (kg) |
Number of bearings (pcs) |
Self-weight (kg) |
|
|
Horsepower at PTO |
Horsepower at PTO |
|||||||
|
2850-29 2850-33 2850-37 2850-41 2850-45 2850-45WF 2850-49WF 2850-53WF 2850-57WF |
3.7 4.2 4.7 5.3 5.8 5.8 6.3 6.9 7.6 |
29 33 37 41 45 45 49 53 57 |
4.2 4.8 5.2 5.7 6.2 4.1 4.1 4.1 4.1 |
137–164 157–184 188–215 195–221 212–239 212–239 232–259 249–276 268–295 |
181217 207–243 248–284 258–292 281–344 281–344 307–343 329–365 354–390 |
118 117 116 115 108 114 113 112 111 |
8 12 12 12 12 16 16 16 16 |
3,382 3,865 4,584 4,727 4,919 5107 5561 5967 6373 |
* The recommended horsepower depends largely on soil quality and the disc’s own weight. The weight listed is based on a 710 mm x 8 mm serrated disc.
Standard equipment:
- 711 mm diameter, 8 mm thick, serrated disc blades.
- Heat-treated alloy steel shafts.
- Heavy-duty steel spacers.
- Wear plates at the bearings.
- Lifting support leg on the drawbar.
- Adjustable mud scrapers on the discs.
- Four dual 12.5Lx15 tires for easy towing and simple turning while plowing.
- Mechanical depth adjustment.
- Hydraulic system, including working cylinders, hoses, brackets, and quick-connect fittings.
- Reinforced pins and bushings at the pivot points.
- Automatic transport locking mechanism.
- The wheel hub contains two tapered roller bearings, which are protected against dust and debris.
Optional equipment:
- Smooth disc plates at both the front and rear—instead of the original serrated ones (711×8 mm).
- Serrated brake discs in the front and smooth discs in the rear (711×8 mm).
- 762×10 mm brake discs are also available in all configurations.
- Rear tow bar.
- Reinforced bearing housing protection plates instead of the standard equipment.
Note: These v-discs are hydraulically operated. The working width can be adjusted by changing the angle and diameter of the discs.
