One of the most cost-effective scraper buckets for 300–600-horsepower tractors, suitable for short-distance material handling. Strong, robust design.
FEATURES
- Robust 13.8 m³ scraper body with a frame designed for heavy-duty use to ensure maximum rigidity.
- A cost-effective solution for material handling over distances of less than 300 meters.
- The frame members are made of 254 x 254 x 20 mm thick hollow sections.
- Tandem coupling option.
- The high-quality work cylinders are reinforced at both ends with ball-joint connections.
- The rear push plate provides significant assistance and protection when pushing is required under difficult conditions.
- The three-piece cutting edge design is similar to that of the R67H scraper body, where the center edge is offset forward to reach the soil first.
- Rollers help guide the discharge shield for efficient and rapid discharge.
Specifications:
RP-180HDE series towed scraper bucket.
| Cutting width |
3.1 m |
Recommended horsepower |
360–600 |
| Bin capacity measured to the rim |
9.9 m³ |
Machine weight distribution: Tongue Wheels |
29% 71% |
| Maximum (heaped) capacity |
13.8 m³ |
||
| Weight capacity (heaped) |
22,779 kg |
||
|
Overall dimensions of the machine: Length Width Height |
9.0 m 3.4 m 2.3 m |
Number of wheels |
2 |
| Tire size |
29.5 x 25 |
||
| Floor panel thickness |
89 mm |
||
| Reversible cutting edge |
Yes |
||
|
Crate dimensions: Height Spreading depth Cutting depth |
1.3 m 0.5 m 127 mm |
Tandem wheel suspension |
Yes |
| Charging type |
Direct |
||
| Laser/GPS compatibility |
Yes |
||
| Tire outer diameter |
3.2 m |
Towing eye |
Fork |
| Ground clearance |
508 mm |
||
| Shipping weight |
11,793 kg |
Special tractor drawbar |
Required |
Note: Two pairs of hydraulic circuits are required to operate the machine. The recommended horsepower depends on the soil type and the machine’s weight.
