The Series 240, X-configuration heavy-duty disc, designed for tractors ranging from 325 to 500 LE, is the optimal choice for the economical cultivation of large tracts of land thanks to its 11-meter working width. This disc performs well even under difficult conditions and is ideally suited for stubble cultivation.
Features:
- Thanks to the four outer depth-limiting wheels, penetration into the soil is uniform across the entire width of the heavy disc.
- This heavy-duty disc operates evenly in all types of plowing.
- The main frame and the beams supporting the axles are made of durable, heavy-duty steel box sections to ensure a long service life.
- In transport position, the ground clearance is 26 cm, with the standard 610 mm diameter disc.
- Reliable, heavy-duty (9”, 229 mm) double-tapered, self-aligning, oil-lubricated bearings in a cast-iron housing.
- The bearings are protected by wear plates against abrasion caused by the soil, thereby extending maintenance intervals and service life.
- Maximum depth: 20 cm.
- Flexible shaft suspension for protection against stones.
- 229 mm disc spacing; 41 mm round steel shafts; equipped with self-aligning, oil-lubricated bearings.
|
Model |
Working width (m) |
Number of discs (pcs) |
Discharge height (m) |
Conveying width (m) |
Recommended tractive force (LE) |
Number of bearings (pcs) |
Weight per disc (kg) |
Net machine weight (kg) |
|
240–994 |
11 |
94 |
4.8 |
4.7 |
325–500 |
24 |
109 |
9,979 |
* Horsepower requirements depend on soil type and the weight of the heavy disc. – Working width depends on disc diameter and axle angle. Note: Two pairs of hydraulic circuits are required to operate this heavy disc.
Standard equipment:
- 24” (610 mm) x 1/4” (6 mm) smooth disc blades.
- Heat-treated alloy steel axles.
- Heavy-duty cast steel spacers.
- 8 wheels, each fitted with 12.5L x 15 tires, facilitate towing, turning, and road transport.
- Reinforced 8-bolt wheel hubs, each with 2 tapered roller bearings and dust covers
- Wheels mounted on a tandem axle.
- Four depth-adjustable wheel assemblies.
- Reinforced pins and bushings at every pivot point.
- Adjustable mudguards on the disc blades.
- Lifting drawbar leg.
Optional equipment:
- Serrated 24” (610 mm) x 1/4” (6 mm) front discs and smooth 24” (610 mm) x 1/4” (6 mm) rear disc plates.
- Knurled 24” (610 mm) x 1/4” (6 mm) disc plates on both the front and rear.
- Rear hitch.
- Rear hydraulic circuit for the drawbar.
- Lighting.
- Bearing guard plate, 6 mm thick.
