4850 Series V Heavy-Duty Disc

We recommend the 4850 Series V heavy disc for tractors with 304–542 lóerős. The V heavy disc is available in both rigid and foldable versions. Both offer excellent mixing capabilities and are suitable for both plowing and stubble cultivation.

FEATURES

• Available in both rigid and foldable versions. Both versions offer excellent mixing capabilities and are suitable for both plowing and stubble cultivation.
• The main frame structure of the V heavy disc and the axle supports are made of high-strength box sections to ensure maximum power transmission, durability, and a long service life.
• It folds hydraulically into the transport position, and the working cylinders mechanically lock the V heavy disc in the raised position, preventing it from falling.
• In the transport position, a ground clearance of 25 cm is possible with the standard 81 cm diameter disc.
• Adjustable disc angle on both the front and rear axles at 18°, 20°, and 22°.
• With the 81-cm-diameter, slightly concave disc bases, a working depth of up to 26 cm can be achieved.
• The weight per disc can reach 210 kg.
• Each V-series heavy-duty disc is equipped with a reliable, heavy-duty, 12-inch double-tapered, greaseable axle bearing that runs in a cast-iron housing.
• The wear plates included as standard equipment reduce damage caused by wear and extend service intervals, thereby lowering maintenance costs.
• Option: additional wear plates—in place of the original ones—for use in extreme soil conditions.

Specifications: 4850 V heavy-duty disc, 305 mm disc spacing; 54 mm axle diameter. Equipped with a double-tapered Timken bearing.

* The recommended horsepower depends largely on soil quality and the weight of the V heavy disc. The weight is based on an 810 mm x 10 mm serrated, slightly concave disc.

Standard equipment:

• 813 mm diameter, 10 mm thick, serrated, slightly concave, grooved disc base.
• Heat-treated alloy steel shafts.
• Adjustable mud flaps.
• Heavy-duty steel spacers.
• Bearing protection plates.
• Lifting support leg.
• Four 12.5Lx15 tires for easy towing and simple turning while plowing.
• Hydraulic system, including working cylinders, hoses, brackets, and quick-connect couplers.
• Reinforced pins and bushings at the pivot points.
• The grooved disc plates do not rotate on the axle, which reduces wear and extends service life.
• Dual 12-inch greaseable tapered shaft bearings.
• Automatic transport lock.
• The wheel hubs feature double tapered roller bearings that are protected against dust and debris.
• Groove-retracting disc system.
• Mechanical depth adjustment.

Optional equipment:

• 813 mm diameter, 10 mm thick, extended-life serrated disc blades.
• Reinforced bearing guard plates instead of the standard equipment.
• Rear hitch.
• Rear hydraulic connections for the drawbar.

Note: These machines are hydraulically operated.